The new ICON 1000 Fairlady Jacket

Period Incorrect: A Harley Sportster XLCH beach racer

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
One of the greatest spectacles in motorcycling is The Race Of Gentlemen, held every summer on the Jersey shore. It’s a recreation of the beach sprints of the late 1940s and early 1950s, and the cars and bikes are modified to match—chopped, bobbed and hopped up, designed to look just like racers from the first half of the twentieth century.

As you can imagine, it’s an expensive pastime: entrants have to be pre-approved by the TROG organizers, who are looking for ‘period correct.’ But there’s more than one way to get that delightful vintage beach racer vibe, as British bike builder Shaun Fenton has discovered.

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
Shaun’s day job is making films for the Hoxton Moto YouTube channel, but he’s just as good at spinning spanners. Like most ‘shed builders’ he loves all things two-wheeled, but there’s nothing amateur about the results: his creations have been displayed at the huge Bike Shed show in London.

“For years I’ve drooled over the styling of Harleys and Indians from the 1940s,” Shaun tells us. “I was also inspired by images from TROG, but an original Harley or Indian from that era is beyond my means. So I decided to build a replica.”

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
The first job was to find a cheap Harley to use as a donor bike, and when Shaun stumbled across a 1970s Ironhead Sportster XLCH, he knew he’d found The One.

“The bike had been imported into the UK as a restoration project, but aside from occasional tinkering, it had languished in a garage for over ten years.” Without revealing his intentions, Shaun struck a deal—and the previous owner’s dream became his dream.

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
The Sportster was stripped down to the engine and frame. Then Shaun put a call in to Jake Robbins Engineering—a renowned girder fork specialist—to fit a hand-built front end and a rigid rear.

“After a short one-way discussion I was bamboozled by his vision. Jake persuaded me to let him loose on the rear suspension, and install a friction-damped, twin spring, live cantilever spring frame.” This was Jake’s homage to the Bentley & Draper spring frame, as fitted to inter-War Brough Superiors.

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
“Like a man possessed, the angle grinder came out, the welder spluttered and snorted, and he smashed out the conversion,” says Shaun.

The original Sportster rear wheel and brake survived intact, but at the front Shaun has fitted a 16’’ rim and drum brake from an Enfield Bullet. The tires are vintage patterns from Dunlop and Coker.

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
The rolling chassis was looking good, so it was time to tackle the styling—with the
handlebars, fuel tank and seat being critical to getting the beach racer vibe. “Jake donated some old bars that had been collecting dust in his workshop, and we set about fabricating the seat and tank.”

“The seat was relatively quick to build, once we had decided on the shape and dimensions. But I deliberated over the fuel tank design. I didn’t want to build a classic Harley tank, I wanted something unusual.”

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
After much carving, rasping and choking on foam particles, a shape emerged. Shaun cut and bent sections of the tank, then mounted the lugs and fittings before welding it all together.

After getting the design and stance right, he had to find a way to mount the essential oil tank and battery box. That meant building an oil tank from scratch, rubber mounted in the small space between the engine and frame. The battery box was yet another hand built feature, and mounted on the swingarm.

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
A predominant feature of the XLCH Sporty is the air intake housing. Shaun looked at aftermarket designs—but decided that since he’d got this far, he may as well fabricate his own. With the leftover metal from the tank build (and a few hand tools) the air intake shape evolved into an eye-catching design.

The rest of the bike came together quickly: the rear fender and lights were auto jumble finds, and Shaun handled the control cables and wiring himself. To finish off the beach racer look, he fabricated and mounted the race plates.

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto
Finally, the bike was sprayed and painted by hand, with a sign writer brushing in the numbers and tank design. “It’s a rustic, aged look,” says Shaun, “and will improve with fuel and oil leaks, and wear and tear. I just hope the previous owner doesn’t see what I’ve done!”

Well, we’re guessing they’d be mightily impressed—as are we.

Hoxton Moto | Facebook

Period Incorrect: A Harley Sportster XLCH beach racer from Hoxton Moto