Side Project: Bryan Heidt’s Ducati 860 cafe racer

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
Somewhere round the back of every custom shop is an unloved bike that’s been sitting there for months, waiting for its moment in the limelight.

In the Atlanta, Georgia shop of Fuller Moto, the unloved bike was this classic Ducati. Of course, it didn’t look anything like the sleek cafe racer we see here.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
The Ducati’s savior was Bryan Heidt, a metal fabricator with a background in industrial design who has been working at Fuller for eight years now.

“It’s ’75 Ducati 860,” Heidt tells us. “It’s named Cavallo Nero, Italian for ‘dark horse.’”

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
The bike started as a motor and frame that Bryan Fuller picked up from Ducati wizard Rich Lambrechts, who runs Desmo Pro in Fort Lauderdale. It sat in the shop for a couple of years, taunting Heidt all the while.

Fuller had no plans for it. Then one day, on a whim, Heidt stuck an old Benelli Mojave tank on the frame. “It suited the bike to a T and I was hooked; I had to see this thing built.”

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
He proposed a joint project to Fuller, with Heidt handling the design and build in his own time. “I got to see my ideas for the bike come to life; he got a spec project moving, without taking up shop time. Win and win.”

The plan was to keep a classic look, but make the Ducati handle and stop like a modern sport bike. On went a 2007 Suzuki GSX-R750 front end, a Yamaha R6 rear shock, and Ducati SportClassic wheels.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
By December 2014, the bike was a roller. And Fuller gave Heidt a fantastic surprise—gifting him the bike as a year-end bonus, and a thank-you for six years of working on hardcore deadlines. “I happily accepted and that’s when things began to snowball.”

Heidt decided to take the modern-but-classic theme up a notch. The stock Dell’Orto carburetors worked great, so those got to stay. The carbs and engine cases were then vapor-honed to make them better than new.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
The electronics were a different story. “The stock stator only put out 110 watts. This wasn’t going to cut it with a new digital ignition, Motogadget m-Unit and Motoscope Pro gauges,” says Heidt.

So a stator from a more modern 900 Super Sport was fitted. Putting out a more desirable 200 watts, it keeps the H4 xenon headlight bright and the lithium-ion Antigravity battery fully charged.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
The 860 model was the first Ducati to come with an optional electric start—but the parts are insanely hard to find. Heidt kept a constant watch on eBay for two years before he hit gold dust—just in time for him to make it to the Handbuilt show in Austin as an invited builder.

He’s kept the front hub from the SportClassic wheel, but swapped the rear for a KLR650 item to beat chain clearance issues. Both hubs were then laced to lightweight SuperMoto rims and wrapped with Pirelli Diablo Rosso tires. The front tire is covered by a cut-down carbon fiber fender from a Monster 800, and mounted using a fabricated stainless steel bracket.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
To match the clip-on handlebars from the GSX-R front end, the stock foot pegs were removed in favor of a pair of GSX-R rearsets—which puts the rider in a more performance-oriented position.

The swingarm has been cleaned up and braced for the R6 mono-shock conversion, and the rear half of the frame is new. To top it off, there’s a custom aluminum seat pan covered by Love’s Trim in Hampton, Georgia.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
“The upholstered seat looked great, but I needed to step things up a notch or two,” says Heidt. “One of those steps was the hand-formed aluminum tail cover that gives the seat more of a race bred appearance.”

On a similar note, the stock Benelli tank had become extremely popular in the custom world, and would no longer set the bike apart. So Heidt cut out the sides and added some more dramatic lines.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
Joe Patterson at JDK expertly painted the tank and tail in a dark graphite Mercedes-Benz metallic. Heidt is a fan of pinstripes, but this bike didn’t call for swooping, pencil-thin lines of color. Instead, Chastin Brand added some small, detailed touches and a classic Ducati graphic—to give the paint an almost factory look.

With updated electronics and finely tuned carburetors (“thanks to my good buddy Wes!”), the bike fires up the instant you press the Motogadget M-switch. The exhaust rumbles through custom stainless pipes and a pair of reverse megaphone mufflers.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
After its debut at the Barber Vintage festival, the bike is now heading down to Desmo Pro for Rich to rebuild the motor with high compression pistons and a port and polish. Those modifications should boost the old girl from 65 to around 80 horsepower—giving plenty of grunt for a machine substantially lighter than stock.

The inverted race forks and rear shock allow the rider to hug corners like the Ducati designers could have only dreamed of 40 years ago. And to cope with the newfound acceleration, radial calipers and 320mm rotors provide ample amounts of stopping power.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.
“The 860 is now nice to look at and a blast to ride,” says Heidt. “But I wanted to make it stand the test of time too. So I swapped out all the nuts and bolts for stainless steel, and everything but the tank and tail is either powdercoated or anodized. The finishes will stay like new for years to come.”

That doesn’t mean the Ducati will be wrapped in cotton wool, though. “For now, this is my personal benchmark, and I couldn’t be more proud of it. But high scores and lap records are meant to be broken,” says Heidt.

“Let’s see where I can go from here.”

Images by Matthew Jones.

This sleek Ducati 860 cafe racer was built by Bryan Heidt of Fuller Moto in his spare time.

SHARE THIS ARTICLE
2K Shares
READ NEXT